Problems And Actions Needed; At The End Of The Cooker's Life - AEG Competence 1020F-W Instruction Book

Problems and actions needed

Problems and actions needed
Never attempt any repairs or work on the cooker which could cause injury or damage the product. If you cannot
solve the problem after checking the list below, contact a service company approved by the supplier.
Problem
The cooker has no electrical supply
Boiling/frying takes a long time.
The oven light is not working
The door safety catch isn't working

At the end of the cooker's life

24
Action needed
Check that:
•
THE FUSE
•
THE PLUG
•
THE RCD
Check you have a suitable pan that conducts heat properly (see
"Choice of saucepan/frying pan" page 10)
Replace broken bulb (see "Changing oven light bulb"
page 18)
Activate the door safety catch (see "The door safety catch" on
page 6)
Disconnect the cooker from the electrical supply.
1
Cut off the electrical lead, as close as possible to
2
the rear of the cooker.
Make sure that the oven door safety catch has been
3
deactivated, to remove the risk of children locking
themselves inside the oven.
Contact your local council to find out where you can
dispose of your cooker.
( ) has not gone
S
is pushed in correctly
(if fitted) has not tripped