JB Systems DMX512 User Manual
  1. Manuals
  2. Brands
  3. JB Systems Manuals
  4. Lighting Equipment
  5. DMX512
  6. User manual

JB Systems DMX512 User Manual

Dmx512 architectural lighting
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
=Power Connections
The unit is supplied with a power plug appropriate to its voltage and destination.
Should any other connections be required they must be carried out with the following.
Power
AC 120V~60Hz
Earth
Green cable
Neutral
White cable
Live
Black cable
Technical Specifications
Power
AC 120V~60Hz
Breaker
Lamps
MSD 250/2(AK-250) / CDM-T150(AK-150)
380mm x 240mm x 460mm / 15in x 9.5in x 18.2in(AK-250)
Dimension
333mm x 200mm x 330mm / 13.2in x 7.9in x13in (AK-150)
Weight
25 kg / 55 lbs (AK-250) / 9.6 kg / 21.3 lbs(AK-150)
WWW.JBSYSTEMS.BE
AC 230/240/250V~50/60Hz
Green/Yellow cable
Blue cable
Brown cable
AC 230/240/250V~50/60Hz
10A(AK-250)/7A(AK-150)
Architectural Lighting
Professional Lighting Technology
AKI COLOR
User Guide
Please read these instructions carefully before use

Advertisement

Table of Contents
loading

Related Manuals for JB Systems DMX512

Summary of Contents for JB Systems DMX512

  • Page 1 380mm x 240mm x 460mm / 15in x 9.5in x 18.2in(AK-250) Dimension 333mm x 200mm x 330mm / 13.2in x 7.9in x13in (AK-150) Weight 25 kg / 55 lbs (AK-250) / 9.6 kg / 21.3 lbs(AK-150) AKI COLOR User Guide Please read these instructions carefully before use WWW.JBSYSTEMS.BE...

  • Page 2: Table Of Contents

    4. How To Set The Unit 4.1 Control Panel 4.2 Main Function 5. How To Control The Unit 5.1 By master/slave preprogrammed function 5.2 By Akicolor Processor (AK-1) controller 5.3 By universal DMX Controller 5.4 DMX512 Configuration 5.5 DMX512 Connection 6. Troubleshooting 7. Fixture Cleaning...

  • Page 3: Safety Instruction

    7. Fixture Cleaning 1. Safety Instruction The cleaning of internal and external optical lenses and/or mirrors must be carried out Please read carefully the instruction, which includes important periodically to optimize light output. Cleaning frequency depends on the environment in which information about the installation, usage and maintenance.

  • Page 4: Technical Specification

    2. Technical Specification 6. Troubleshooting Power supply Following are a few common problems that may occur during operation. Here are - AC 120V ~ 60Hz / 230v ~ 50Hz some suggestions for easy troubleshooting: Lamp A. The unit does not work, no light - MSD 250W (AK-250) / CDM-T150W (AK-150) 1.

  • Page 5: How To Install The Unit

    3. Connect the unit together in a “daisy chain“ by XLR plug from the output of the unit to the input of the next unit. The cable can not be branched or split to a “Y“ cable. DMX512 is a very high-speed signal.

  • Page 6: How To Install The Unit On The Floor

    Pattern 0 Color chasing – 8 after 8 in sequence 5. If you have another unit, to link the unit together, please refer to chapter 5.3 DMX512 Connection . 5.3 By universal DMX Controller If you use a universal DMX controller to control the units, you have to set DMX address from 1 to 512 channel so that the units can receive DMX signal.

  • Page 7: How To Set The Unit

    To confirm the selected functions 3. DMX input/output For DMX512 link, use 3-pin XLR plug cable to link the unit together. 4.2 Main Function To select any of the given functions, press the MENU button up to when the required one is showing on the display.

  • Page 8: By Universal Dmx Controller

    Pressing ENTER button and the display will light on. Use “-“ and “+“ button to change the DMX512 address. button, the unit will focus on different color each time you press ENTER button. To go back to Once the address has been selected, press the ENTER button to setup the DMX address.

This manual is also suitable for:

Aki color ak-1Aki color ak-250Aki color ak-150

Table of Contents