Putting In Extra Items Or Taking Items Out Before End Of Programme; Drying Cycle Complete / Removing Washing - AEG Electrolux LAVATHERM 58800 User Information

Putting in extra items or taking items out before end of
programme
1. Open door.
1
Warning! Laundry and drum can become hot. Risk of burns!
2. Load or remove laundry items.
3. Close door securely.
4. Press the START/PAUSE button to continue the drying cycle.

Drying cycle complete / removing washing

If the audible signal is set, at the end of the programme a 4x signal
sounds and the display alternates between the messages
"ANTICREASE", "PLEASE EMPTY THE TANK" and "PLEASE CLEAN THE FIL-
TERS" .
3
The drying cycle is automatically followed by a anti-crease phase which
lasts around 30 minutes. The drum rotates at intervals during this
phase. This keeps the laundry loose and free of creases. The laundry can
be removed at any time during the anti-crease phase. (The laundry
should be taken out towards the end of the anti-crease phase at the
latest to prevent creases from forming.)
1. Open door.
2. Before removing the laundry, remove fluff from the micro-fine filter.
It is best to use a damp hand for this purpose (see "Cleaning and main-
tenance" section).
3. Remove laundry.
4. Turn the programme knob to OFF.
Important! After each drying cycle
– clean the micro-fine filter and fine filter,
– drain the condensed water container
(see section "Cleaning and maintenance").
5. Close door.
19