AEG Electrolux LAVATHERM 58800 User Information page 29

Condensation dryer
Table of Contents

Advertisement

Problem
Drying results unsatis-
factory.
Display shows:
PLEASE CLOSE THE
DOOR.
Door cannot be
opened with the DOOR
button.
Door cannot be closed.
Display shows:
SELECTION ERROR.
Drum light is not
working.
Programme stops mid-
way, display shows:
THE TANK IS FULL,
PLEASE EMPTY.
Possible cause
Wrong programme selected.
Fluff filter blocked.
Heat exchanger blocked
with fluff.
Incorrect amount of wash-
ing.
Ventilation slots in base area
covered up.
Residue on inside surface of
drum or drum paddles.
Door not closed properly.
Mains plug disconnected.
Programme knob in OFF po-
sition.
Fine filter not in place and/
or large mesh filter not in-
serted correctly.
The selected function can-
not be combined with oth-
er programme settings.
Programme knob in OFF po-
sition.
Defective light bulb.
Condensate tank is full.
Remedy
Select a different programme
the next time you dry (see sec-
tion "Overview of pro-
grammes").
Clean fluff filter.
Clean heat exchanger.
Observe recommended loads.
Uncover ventilation slots in
base area.
Clean inside surface of drum
and drum paddles.
Adjust using the ¤ DRY LEVEL
option (see section "Drying,
Setting options").
Close door - there should be
an audible click.
Restart the programme.
Plug in at mains socket.
Set programme. Door can be
opened at any time by exert-
ing pressure on the door.
Install fine filter and/or snap
large mesh filter into place.
Select another function.
Turn programme knob to
L LIGHT or to any programme.
Replace light bulb (see next
section).
Empty condensate tank, then
start programme with the
START/PAUSE button.
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents