Completing Assembly - Burley d’lite Owner's And Safety Manual

NOTE: For added safety, always keep upper and lower buckle straps
fastened.
Using the Recessed Helmet Pocket
The hel met pock et on the child seat is designed to provide added room for the
back side of a child's helmet. The seatback can be modifi ed by making the follow-
ing adjustments:
• Loosen ten sion on upper buckle strap (B) located be hind child seat (illustra-
tion page 14).
• Connect/tighten low er buckle strap (A) located be hind child seat (illustration
page 14).
The size and shape of the helmet pocket can be adjusted by adding/subtracting
tension from the upper buckle strap (B).
Using the Child Seat Divider
This feature is designed to provide additional comfort and structure to the child
seat by limiting two passengers from sliding to the center of the seat.
• Connect center crotch strap O-ring to snap hook located on the front splash
guard.
• Seat divider strap tension can be adjusted using the plastic slider on the crotch
strap.
NOTE: We recommend that the Child Seat Divider feature be used
when transporting two (2) passengers only.
VIII. Completing Assembly
At this time your trailer is near ly assembled. Snap the fabric tail gate and splash
guard to the snap studs on the side rails if you haven't already done so.
NOTE: It's easier to snap these when the trailer is folded; they can
remain snapped in place during folding and un fold ing.
Burley d'Lite Owner's Instruction and Safety Manual
15