Burley d’lite Owner's And Safety Manual page 9

Installation and Use of the Handle
Your Burley d'Lite comes with a two-position handle that allows for easier ma-
neuvering of the trailer when it is not attached to your bicycle. The handle is also
an important part of the optional Burley Jogger Kit ™ and the optional Walk 'n
Roller™ kit. Both of these accessories are available at your local bike shop.
The handle for the d'Lite is installed quite easily. Simply depress the buttons on
either side of the handle and slide the handle into the handle bar receivers as
shown in the illustration below. The handle is designed for either a high or low
position depending on the height and comfort of the user. This position can be
changed by fl ipping the handle over and installing it as described above.
Parking Brake Operation
The pre-installed parking brake on your Burley d'Lite is used to keep the trailer
stationary when you park your bike or when using the optional Burley Jogger
Kit™ or Burley Walk 'n Roller Kit™.
To engage the brake,
move the handle to
the left.
Simply move the
handle to the right to
disengage the brake.
Burley d'Lite Owner's Instruction and Safety Manual
9