Burley d’lite Owner's And Safety Manual page 16

Installation and Use of the Cover
Your d'Lite Big Screen 2-in-1 Cover is held in
place by six snaps at the rear and top, and front.
Always use your cover to keep debris out (and
toys inside) of the trailer when it's in use. To
install the cover, unfold it and snap the top two
snaps fi rst. Next, pull the cover toward the back
of the trailer and snap the two rear snaps. Finally,
using the B-tabs in front, pull the cover taut and
affi xing the snaps to the front corners.
Folding and Stowing the Front Window
Folding and stowing the front window is quick and easy. Begin by unzipping the
window. Next, fold the window in half toward the back of the trailer. Then roll
the window up toward the top of the trailer. Hold the window in place by insert-
ing the elastic straps into the Velcro holders on the top of the trailer.
Using the Adjustable Sunscreen
Your Burley d'Lite is equipped with an adjustable
sunscreen to keep your kids in the shade during
bright, sunny days. To move the adjustable sun-
screen, simply pull on the tabs to move it up or
down on the trailer as necessary. If more visibility
is required, pull the sunscreen up in the middle.
This is depicted in the illustration at right.
Light Installation
To make your trailer more visible, clip a light into
the light-holder tab sewn on the upper part of the back of your cover. There are
several brands of in ex pen sive clip-on lights that will make your trailer more vis-
ible to motorists and other cyclists. You're done! Please go back over these direc-
tions and recheck your work.
For increased security and safety, Burley offers a clear front and red rear LED light
package. These lights mount directly in the place of the left hand side refl ectors.
See your Burley dealer for details.
16
Burley d'Lite Owner's Instruction and Safety Manual