Troubleshooting; Restoring Flash Timing Default; Restoring System Factory Default Settings; Information Retention During A Powerloss - Polycom SE-220 SoundPoint Pro Installation Instructions And User Manual

Restoring Default Flash Timing
Enter the System Settings Directory then scroll
Press SELECT. Scroll until you see RESTORE DEFAULT FLASH TIME? Press
SELECT.

Restoring System Factory Default Settings

All factory system settings can be restored at the same time. Make sure you wish to
restore ALLfactory system settings before proceeding with this feature.
Enter the System Settings Directory then scroll
SYSTEM SETTINGS? Press S E L E C T the following will appear on the display.
If you are sure you wish to restore all line settings, press

Information Retention During a PowerLoss

Soundpoint Pro retains all stored information during loss of power. It is not necessary to
reset any programmed or stored parameters.
CAUTION: SoundPoint Pro will not operate without power. See the "Safety
Instructions" on Page ii for precautions.
SoundPoint Pro Desktop Conference Phone Operation
until you see EDITFLASH TIME?
until you see RESTORE DEFA U LT
SELECT again.
2 –2 4
®
SOUNDPOINT PRO TROUBLESHOOTING
SoundPoint Pro Desktop Conference Phone Troubleshooting
3 –1
Chapter 3