Adding A Caller On An Inactive Line; Placing Conference On Hold; Dropping A Conference Participant; 4-Wayvolume Control - Polycom SE-220 SoundPoint Pro Installation Instructions And User Manual

Adding a Caller on an Inactive Line

Incoming Call
1. When a new call is received, ask the active participant to Hold. Press the
LINE
2. Press the key to answer the incoming call.
3. Tell the incoming caller you will add him to the conference.
4. Press the CONF key.
Outgoing Call
1. Ask the active participant to Hold while you call another participant. Press the
HOLD
key.
LINE
2. Press the inactive key, and dial the number of the person you wish to add.
3. When the person answers, tell him he is being added to the conference.
CONF
4. Press the key.

Placing Conference on Hold

To put a conference call on hold, press the
able to talk to each other. Press CONF to return to the conversation.

Dropping a Conference Participant

Press the LINE key of the participant you wish to drop from the call.
4-Way Volume Control

Handset, Headset, Speaker

Press the keys at any time during a call to adjust volume. SoundPoint Pro will
maintain the same volume for future calls until changed.

Dial Tone

Listen for the dial tone; press the keys to adjust the level. Then hang up or make a call.
Dial tone volume will remain at the level set until intentionally changed.
SoundPoint Pro Desktop Conference Phone Operation
H O L D
HOLD
key. The other participants will not be
2 –6

Accessing, Using, and Programming Directories

SoundPoint Pro stores and retrieves information for your convenience. This information
is organized into directories which can be accessed and customized from the keypad.
k e y.

Navigating the Directories

Pressing SELECT
Initially, enter the Directory Structure at the Main Menu level,
Once in the Directory Structure, move another level deeper, or
Confirm a setting or information youíve selected, entered, or edited.
The appears in the corner of the display when the Directory Structure has more
options or information at that level. You can use the
through the options.
BACK
The key is the way to:
Return to a higher level of the Directory Structure,
Back up to remove characters while editing an entry, or
When pressed twice in succession, exit the Directory Structure altogether.
will allow you to:
keys to scroll continuously
SoundPoint Pro Desktop Conference Phone Operation
2 –7