System Settings Directory; Entering The System Settings Directory; Setting The Time Of Day; Setting Lcd Contrast - Polycom SE-220 SoundPoint Pro Installation Instructions And User Manual

Enabling orDisabling CallerID for Each Line
While viewing a line settings status, press
that line. Scroll to EDITCALLER ID? Line 2 of the display will show the current
Caller ID status for that line. Press SELECT
Use to change Caller ID status. When the desired status displayed press
Editing Line-In-Use Voltage Threshold
While on-hook (hung up) SoundPoint Pro will indicate if another phone, computer, or
Fax machine is using one or both phone lines by lighting the
solid red. Line-in-use detection is accomplished by detecting the voltage on each line,
which changes when a line is in use. Different phone systems may have different line-in-
use voltages. SoundPoint Pro allows you to change the line-in-use voltage threshold to
account for voltage variances by telephone system. If the SoundPoint Pro Console's line-
in-use indicators are not lighting solid red while a line is being used by another device,
try changing the line-in-use voltage settings until the correct level is achieved.
While viewing a line settings status, press
that line. Scroll to EDITIN-USE? Line 2 of the display will show the current line-in-
use selection: STANDARD, ALTERNATE A, or ALTERNATE B. Press
Use to scroll through line-in-use status options. When the desired status is displayed
SELECT
press again.
Restoring Factory Default Settings forEach Line
All factory default settings can be restored at once for each line. Make sure you wish to
restore ALLfactory settings before proceeding with this feature.
While viewing a line settings status, press
that line. Scroll to RESTORE DEFAULT LINE SETTINGS? Press
If you are sure you wish to restore all line settings, press
SoundPoint Pro Desktop Conference Phone Operation
SELECT to view the line settings options for
again.
S E L E C T
a g a i n .
LINE
key LED indicators
SELECT
to view the line settings options for
SELECT
again.
SELECT
to view the line settings options for
SELECT again.
SELECT
again.
2 –2 0

System Settings Directory

The System Settings Directory allows you to view status of—and program options for—
a variety of system settings, including:

Setting the Time of Day

Setting the LCD Contrast
Setting Repetitive Redial Parameters
Selecting and Setting Telephone Number Auto-Formatting
Editing Flash Timing; Restoring Default Flash Timing
Restoring System Factory Default Settings

Entering the System Settings Directory

SELECT
Press to view the Main Menu options, scroll
SELECT
again to enter the System Configuration Directory.
Setting the Time of Day
Upon entering the System Settings Directory, EDITTIME? is displayed. Press
edit the time of day.
Enter the correct time hh:mm. After hours and minutes are entered, a prompt will appear
for AM or PM, which can be set by pressing the 1 or 2 keys, respectively. When the
SELECT .
correct time is entered, press

Setting LCD Contrast

SoundPoint Pro allows you to control how light or dark the LCD display appears. Enter
the System Settings Directory then scroll
progressive contrast status bar will show the current contrast setting. Press
Use the keys to adjust the LCD contrast to the desired level, then press
SoundPoint Pro Desktop Conference Phone Operation
to SYSTEM SETTINGS. Press
SELECT
until you see E D I T LCD CONTRAST?A
SELECT .
SELECT .
2 –2 1
to