Connecting The Hdmi Input; Connecting The Dvi Input - BenQ VL3735 Quick Start Manual

Connecting the HDMI input

Connect the HDMI output of your output
equipment to the HDMI terminal on the TV
using an HDMI cable (not provided).
To view video image from this input, press Input
and select HDMI.
HDMI (High-Definition Multimedia Interface)
is an uncompressed and all-digital audio/
video interface. HDMI provides an interface
between any audio/video source, such as a
set-top box, DVD player, or A/V receiver over
a single cable.
HDMI supports existing high-definition video
formats (720p and 1080i). It also has the flex-
ibility to support enhanced definition for-
mats (576p and 480p), as well as standard
definition formats (480i and 576i). It also
supports Dolby 5.1 audio and high-resolu-
tion audio formats.
See "Supported Component/HDMI input sig-
nal timing" on page 43

Connecting the DVI input

1. Connect the digital video output of your
output equipment to the HDMI terminal on
the TV using a DVI to HDMI adaptor cable
(not provided).
2. Connect the DVI audio output of your
output equipment to the TV's DVI- AUDIO
L/R input terminals using an appropriate
audio cable (not provided).
To view video image from this input, press Input
and select HDMI.
The DVI input only supports signals higher
than 480i and 576i. When connected to a
High Definition Set Top Box, it is
recommended that you set the output
resolution to 1080i.
When connected to a PC, select 1024 x 768
as the image resolution. See
appropriate video output resolution on a PC"
on page 43 for further information.
See "Supported VGA/DVI input signal tim-
ing" on page 43
26 Connecting audio and video inputs
for timing options.
"Setting up
for timing options.
HDMI cable
DVD player
DVI to HDMI
adaptor cable Audio
cable
PC