Table of Contents
Advertisement
4. Connect the antenna cable
Connect a TV antenna cable fly-lead from your TV antenna system or Cable TV (CATV) to the
TV antenna input on the rear of the TV. Check to make sure that the cable connection is firmly
in place.
• A poor quality TV signal will produce a poor picture and/or sound on your TV. For high quality
picture and sound, you will need a high quality TV signal. Depending upon your location, for
best TV signal reception, you should have a properly aligned outdoor TV antenna system. If
need be, consult a professional antenna specialist.
• This TV has a built-in analog TV tuner, which requires the TV antenna cable connection to an
external TV antenna system. If you wish to make use of the digital LCD screen to view digital
TV, you should connect an external digital TV tuner (decoder) set top box (STB) to the TV
using a digital signal cable (HDMI or DVI) connection. See
10.
5. Connect the power cable
1. Locate the power cable from the packaging, unwrap it, and plug the appropriate end into
the AC INLET socket on the rear of the TV (as illustrated below).
2. Connect the other end into an appropriate wall power outlet, and switch it on (if switched).
The TV will enter standby mode and the power indicator (on the front lower right) will
light up red.
• The type of power cable plug and socket illustrated may differ from the type used in your
region.
• Only use an appropriate power cable for your region. Never use a power cable which appears
damaged or frayed. Never change the plug type on a power cable. Be aware of total loading
when using extension cords or multiple outlet power boards.
WARNING:
• This BenQ LCD screen TV has been engineered and manufactured with the highest priority on
safety, however, IMPROPER HANDLING OR USE CAN RESULT IN POTENTIAL ELECTRICAL
SHOCK OR FIRE HAZARD. Please handle this TV with care. If damaged, turn off the power
and unplug the power cable from the TV. Transport the TV to your nearest BenQ authorised
service centre for repair.
• There are no user serviceable parts in this TV. Never unscrew or remove any covers. There are
dangerous voltages inside. Turn off the power and uplug the power cable before moving the
TV.
4
Section 1: Quick Start Guide
Antenna cable
Power outlet
Power cable
TV antenna
input
"Getting to know your TV" on page
Advertisement
Table of Contents
