LIGHT FIXTURES - FLUORESCENT (SEE NEXT PAGE FOR LED LIGHT FIXTURES)
Light Fixtures
Light fixtures are located on the sides of each door
assembly, both sides (just inside the doors).
Open the door all the way.
Access lamp by removing the lamp cover/diffuser.
Applying gentle squeezing pressure to lamp
cover and rotating will release the cover.
Removal of lamp:
Press bulb down until top contacts are clear of the
upper socket.
Tilt top of bulb away from the upper socket and lift
bulb out.
Replace bulb by performing this operation in
reverse order.
Light Ballast Access
Remove electrical power from the unit.
Engage door "hold open" mechanism.
Remove shelving.
Remove interior deck by pushing up from
underneath in the bag storage area.
Ballast
Light Assemblies
(Inside Edge - Both Sides)
Light Assembly
Bulb
8
Lower Socket
with Spring
Bulb Cover
Need help?
Do you have a question about the Impulse CSC3223 and is the answer not in the manual?