OVERVIEW AND WARNINGS
OVERVIEW
The Structural Concepts non-refrigerated service cases are designed to merchandise unpackaged bakery
products at ambient temperatures.
These cases should be installed and operated according to the following instructions to insure proper
performance.
This unit is designed for the display of products in ambient store conditions where temperatures and
humidity are maintained at a maximum of 75° F and 55% relative humidity.
CAUTION
WARNING
ELECTRICAL
HAZARD
CAUTION! LAMP REPLACEMENT GUIDELINES
LED lamps reflect specific size, shape and overall design.
Any replacements must meet factory specifications.
Fluorescent lamps have been treated to resist breakage and
must be replaced with similarly treated lamps.
Disconnect ALL ELECTRICAL SOURCES before servicing.
CAUTION! GFCI BREAKER USE RECOMMENDATION
If N.E.C. (National Electric Code) or your local code
requires GFCI (Ground Fault Circuit Interrupter) protection,
the use of a GFCI breaker is strongly recommended.
CAUTION! POWER CORD AND PLUG MAINTENANCE
Risk of electric shock. If cord or plug becomes damaged,
replace only with cord and plug of same type.
WIRING DIAGRAM FORMAT & LOCATION
Each case has its own wiring diagram folded & in its own packet.
Wiring diagram placement may vary; it may be placed near ballast
box, field wiring box, raceway cover, or other related location.
WARNING
Risk of electric shock.
3
Need help?
Do you have a question about the Impulse CSC3223 and is the answer not in the manual?