THE DUAL GRILL
CAUTION - ACCESSIBLE PART MAY BECOME HOT WHEN THE GRILL IS IN USE.
SHOULD BE KEPT AWAY.
The grill is a dual circuit grill which means that the full area of the grill can be used or for economy purposes, the
centre section only can be used when cooking smaller quantities of food.
USING THE GRILL
Please note: D2160-1G control knobs and graphics will differ in type and shape from that shown in the diagram.
1. To operate the grill turn the grill control clockwise
for full grill or anticlockwise for centre section
only.
2. The highest number represents the hottest
setting and the lowest number represents the
coolest setting.
3. Ensure the second oven control is in the OFF
position '0'.
THE GRILL DOOR MUST BE LEFT OPEN
DURING GRILLING.
ELEMENTS WILL SWITCH OFF AND THE
OVEN LIGHT WILL TURN ON AND OFF AS
A WARNING.
THINGS TO NOTE
·
The cooling fan for the controls will operate in
conjunction with the grill. For more information on
the operation of the cooling fan see page 5.
·
The grill indicator neon will glow until the desired
power level has been reached. It will turn ON
and OFF periodically during cooking showing that
the temperature is being maintained.
·
The outer grill element may appear to glow
slightly brighter than the inner element. This is
quite normal
·
The cranked shelf MUST only be used in the grill
compartment.
·
Some smoke from fat splashes may be evident
as the grill cleans itself.
IF CLOSED THE
USING THE TELESCOPIC RUNNERS
(where fitted)
1. Ensure the telescopic runners are pushed back
into the oven cavity before fitting the shelf.
2. Holding the front edge of the shelf with both
hands, place the rear shelf forms over the
telescopic runners.
3. Slide the shelf into position, lifting slightly at the
front so that the shelf locates into the retaining
hooks.
To remove, raise the front edge and withdraw the
shelf.
RETAINING
HOOK
12
CHILDREN
FORM