Pre-Heating Your Grill - Char-Broil QUANTUM Manual

If your grill is not getting hotter than 250°F to 300°F these steps
should be taken first to reset the gas regulator safety device:
1. Open the grill lid.
2. Turn off all knobs on the control panel in front.
3. Turn off the tank knob.
4. Disconnect the regulator from the LP tank.
5. Wait 30 seconds.
6. Reconnect the regulator to the LP tank.
7. Slowly open the LP tank knob all the way. Do not put
excessive force on the valve at the full open position to avoid
damaging the valve.
8. Turn on the appropriate control knob and light the grill per the
instructions on the control panel.
An illustration of this process is included in the Assembly Manual
or go to www.charbroil.com for more information.
Remove all Point-of-Purchase advertising material from all grill surfaces
before first use.
We recommend letting your grill cook on it's highest setting for 15-20
minutes prior to your first use. This aides in removing the oils used dur-
ing manufacturing.

Pre-Heating Your Grill

Just like your home oven, the Char-Broil Quantum grill should be
pre-heated to provide optimum performance. Preheat the grill on high for
10-15 minutes – longer if weather conditions require.
Please refer to the lighting instructions inside the assembly manual if
you have questions about how to light your grill. A match-light chain and
hole is provided for your convenience.
5