Brinkmann Elite Owner's Manual page 29

Step 13
To install the side burner, remove
the pre-attached nut and M4
washer on the side burner and
install the side burner as illustrated
in Figure 1. Attach one M4 bolt
(silver) to secure the tip of the side
burner as illustrated in Figure 2.
Attach one M4 X 10 mm bolt (silver)
from the top of the side burner to
secure in place as illustrated in
Figure 3. Attach two M4 washers
and one M4 nut and one wing nut
to secure the side burner as
illustrated in Figure 4.
Step 14
Attach side burner igniter lead
to electrode on bottom of side
burner.
28