Table of Contents
Advertisement
12
Using the Accesories
There are two temperatures to be set:
• the oven temperature: refer to the table for roasting;
• the core temperature: refer to the table for core temperature sensor;
Only use the food sensor supplied or genuine replacement parts.
1. Activate the appliance.
2. Put the point of the core temperature
sensor (with the symbol
dle) into the centre of the meat.
3. Put the core temperature sensor plug in
the socket on the front of the appliance.
The display shows food sensor symbol and
default core temperature. When you use
the core temperature sensor for the first
time, the display shows 60°C as the de-
fault core temperature.
If you change the core temperature the new
value will be saved and displayed during next
use of the core temperature sensor.
4. Press
or
flashes.
5. Press
or the settings save automatically after 10 seconds.
6. Set the oven function and, if necessary, the oven temperature.
The display shows current core temperature sensor temperature and (which shows
the relation between current core temperature and set core temperature).
The core temperature sensor must stay in the meat and in the food sensor socket during
the cooking process.
When the appliance calculates the provisional duration time for the first time, the Timer/
Residual heat display shows "-" that changes position. When the first calculation ends, the
Timer/Residual heat display shows the duration of the cooking process. Calculations are
running in the background during the cooking process. Display is updated from time to
time with new duration value.
7. When the meat is at the set core temperature, the symbol for the core temperature
and core temperature sensor flash. An acoustic signal operates for two minutes.
Press any button to stop an acoustic signal (except ON/OFF).
8. Remove the core temperature sensor plug from the socket . Remove the meat from the
appliance.
9. Deactivate the appliance.
Every time you put the core temperature sensor in the socket, you need to set the duration
and end time again.
on the han-
to set core temperature.
Advertisement
Table of Contents
