Electrolux EDC 77150 W User Manual page 26

125983630 gb.qxp 2006-10-02
26 electrolux installation
Door reversal
To make it easier to load or unload the
laundry the door can be reversed.
Reversing the door is not possible if after
this operation the appliance result
installed behind a door with a hinge on
the opposite side to that of the
appliance
This operation must be carried out by
qualified personnel.
Please contact the nearest Service
Centre.
12:39 Page 26
Electrical connection
This machine is designed to operate on
a 220-230 V,
single-phase, 50 Hz supply. Check that
your domestic electrical installation can
take the maximum load required (2.4 kW),
also taking into account any other
appliances in use.
Connect the machine to an earthed
socket, in accordance with current
wiring regulations.
The manufacturer declines any
responsibility for damage or injury
through failure to comply with the
above safety precaution. Should
the appliance power supply cable
need to be replaced, this must be
carried out by our Service Centre.
Important!
The power supply cable must be
accessible after installing the machine.