Setting Up A Wireless Ethernet Network - Gateway Computer User Manual

6
Click the
General
7
Click
Obtain an IP address automatically
8
Click to close the Internet Protocol (TCP/IP) Properties dialog box.
OK
9
Click to close the Local Area Connection Properties dialog box.
OK
10
Click to close the Network Connections window.
X
11
Repeat this procedure for every computer on your network.
Where to go from here
If you are setting up a wireless Ethernet, go to
on page 89.
-OR-
If you are setting up a wired Ethernet, go to
page 97.

Setting up a wireless Ethernet network

See the instructions that came with your access point or wireless access point router for
initial setup. How you set up your access point varies depending on the features of the
access point and your networking situation.
tab.
www.gateway.com
Creating an Ethernet network
.
"Setting up a wireless Ethernet network"
"Setting up a wired Ethernet network" on
89