Installing Memory - Gateway Computer User Manual

Installing memory

When you upgrade the computer memory, make sure that you install the correct type of
memory module for your computer. Your computer uses DIMM memory.
To install or replace DIMM memory:
1
Remove the side panel by following the instructions in
on page 49.
2
For more stability, place your computer on its side. To avoid scratching the case, place
it on a towel or other non-abrasive surface.
3
Find the memory module banks on your system board.
Important
Your computer's memory location may vary from the illustration below.
www.gateway.com
Installing memory
"Removing the side panel"
53