Suunto QUEST User Manual page 31

To put the device into sleep mode:
1. After the last step of general settings, when the device asks you to confirm
that the setting changes are done, keep
into sleep mode.
2. Press any button to activate the device again.
3. Set the initial settings, see Chapter 5 Getting started on page 12.
NOTE: When replacing the battery, only the time and date change. The device
remembers your previous initial settings and recorded exercises.
Example: adjusting alarm settings
When the alarm is on, is shown on the display.
To set the alarm on/off:
1. In the time view, keep
2. Browse to alarm with
3. Set the alarm on or off with
4. Set the alarm time with
When the alarm sounds, press stop (
After you have stopped the alarm, it sounds the same time the following day.
NEXT
pressed to enter the settings.
NEXT
and confirm with
START STOP
and
START STOP
and
START STOP LIGHT LOCK
LIGHT LOCK
pressed until the device goes
.
NEXT
. Confirm with
LIGHT LOCK
. Confirm with
) to turn it off.
en
.
NEXT
.
NEXT
31