BT Verve 100 User Manual
BT Verve 100 User Manual

BT Verve 100 User Manual

British telecommunications (bt) user guide digital cordless telephone verve 100

Advertisement

Quick Links

Verve 100 – Edition 5 – 18.8.00 – 3250
Verve 100 – Edition 5 – 18.8.00 – 3250
Using the memory
You can store up to 10 numbers in the memory, each up to 22
There are 2 ringer melodies to choose from.
digits long, which can then be speed dialled. Stored numbers
can include settings made with the
and
buttons. You can
Press the
also enter a Pause by holding down the R (Recall) button.
You will hear the current ringer melody.
Select melody
Press the
Press the
button.
Press the
button.
Enter a number between
under which you
The volume of received calls can be set to 3
want to store the number.
different levels. 1 is the lowest.
Enter the telephone number to be stored.
Press the
Press the
button to confirm.
Select a level
You will hear a confirmation beep.
Press the
Press the
button.
You can lock the keypad so that it cannot be used
Enter the memory location number
under
accidentally while carrying it around.
which the number is stored.
You are still able to receive calls.
Press the
button. The number is dialled
automatically.
Press and hold down the
shows:

Additional features

The keypad is now locked and you cannot dial out.
Incoming calls can be answered as normal by
pressing the
To unlock the keypad press and hold the
until the display returns to standby.
There are 3 volumes to choose from, with 1 being
the lowest.
Press the
button, then the
button.
You will hear the current ringer volume.
Use the keypad to enter the setting you want
.
Press the
button to confirm.
7
Verve 100 – Edition 5 – 18.8.00 – 3250

Help

button, then the
button.
Registration did
The battery is not
not work.
sufficiently
charged. Handset
or
using the keypad.
and base station
button to confirm.
were not prepared
for registration.
No display.
The battery is not
charged.
No reaction when
The keypad is
pressing keypad
locked.
button, then the
button.
buttons.
using the keypad.
No radio
The handset is
button to confirm.
connection to the
outside the base
base station
station range.
icon flashing.
The handset is not
registered.
The base station is
not active.
button until the display

General information

button.
button
If you experience a problem with your product you should
contact the Helpline on
local call rates. If the problem is not remedied, you will be
advised to return your product to the helpline.
If your product needs repair after the guarantee period has
ended, the repair must meet the approval requirements for
connection to the telephone network. We recommend that
you call the Helpline on
our recommended repair agents.
8
9
Verve 100 – Edition 5 – 18.8.00 – 3250
Pack the base station and handset securely, preferably in the
original packing. All parts must be returned, including line
cords, power supply unit and original batteries. We cannot
take responsibility for goods damaged in transit.
Charge the battery
for 16 hours (see
pages 4 and 5).
Remove and then
All items of telephone equipment have a Ringer
re-insert the power
Equivalence Number (REN) which is used to calculate the
supply unit.
number of items that may be connected to any one
telephone line. The Verve 100 has a total REN of 1. Any
Charge the battery
other instrument provided by BT may be assumed to have
or replace it (see
a REN of 1 unless stated otherwise. A total REN of 4 is
page 4).
allowed per telephone line. (For example: if the Verve 100
is used in conjunction with three extension telephones,
Press
for 1
each with a REN of 1, then the total REN = 4.)
second.
This product complies with the R&TTE Directive 99/05/EC.
Move closer to the
base station.
Your Verve 100 can be connected to compatible switchboards.
Register the handset
If in doubt, please contact your switchboard supplier.
(see page 5).
Your Verve 100 is pre-set to TONE dialling. You will hear a
tone beep each time you dial a number. Tone dialling is suitable
Check the power
for all modern digital exchanges. If you cannot make a call with
supply unit at the
TONE dialling you may need to switch to PULSE dialling.
base station.
Press the
button.
Press the
button.
Press the
button, then the
button.
. Calls are charged at
Press the
button to set PULSE dialling.
Press the
button to confirm.
Press the
button to return to standby.
If you wish to return to TONE dialling, press
and ask for details of
instead of .
10
Verve 100 – Edition 5 – 18.8.00 – 3250
Verve 100 – Edition 5 – 18.8.00 – 3250
CE compliant to
89/336/EEC (EMC Directive) &
73/23/EEC (Low Voltage Directive)
Verve 100
The telecommunications services described in this publication
are subject to availability and may be modified from time to time.
Services and equipment are provided subject to British Telecommunications
plc's respective standard conditions of contract. Nothing in this publication
forms any part of any contract.
Touchtone™ is a registered trade mark of
British Telecommunications plc in the UK.
© British Telecommunications plc 2000.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed by: The Art & Design Partnership Limited.
Printed in Germany. Verve 100. Issue 1 (8/00) 4
This equipment is not designed for making emergency telephone
calls when the power fails. Alternative arrangements should be made for
Printed on paper which meets international environmental standards.
Siemens number: A31008-G100-P100-1-7619
This product is intended for connection to analogue public switched
telephone networks and private switchboards in the United Kingdom.
access to emergency services.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Verve 100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BT Verve 100

  • Page 1 Equivalence Number (REN) which is used to calculate the for registration. supply unit. number of items that may be connected to any one telephone line. The Verve 100 has a total REN of 1. Any No display. The battery is not Charge the battery other instrument provided by BT may be assumed to have charged.
  • Page 2 This will prevent the risk of the phone being answered before the battery is charged. After charging your Verve 100 for the first time, subsequent charging time is approximately 4-5 hours. Batteries and case may become warm during charging. This is normal and is not dangerous.

Table of Contents