Answering Machine; Switch On/Off - BT FREELANCE XB2500 User Manual

Answering machine

Your BT Freelance XB2500 can digitally record up to
15 minutes of messages. Each message can be up to a
maximum of 3 minutes long.
You can operate your BT Freelance XB2500 from:
the handset

the base

remotely from any external Touchtone™ telephone.

Your BT Freelance XB2500 comes with two pre-recorded
outgoing messages, one for Answer and Record mode and
one for Answer Only mode. You can also record your own
outgoing message.
Your BT Freelance XB2500 gives clear voice prompts to help you
when using the answering machine.

Switch on/off

When first connected to the mains power, your BT Freelance
XB2500 is set to ON and Answer and Record.
When set to on, the
1. Press the Left soft key
Calls
press .
OK
Vol.
2. Press or until
Calls
Redial
Calls
to select.
Vol.
Vol.
Redial
3. Press or to select
Calls
Redial
Vol.
4. Press and hold to return to standby mode.
Redial
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
icon is displayed.
, the display shows
is displayed and press
anS On/OFF
or , then press
On OFF
,
anS Machine
OK
to confirm
OK
If you have not already set the date
and time, you will need to do this
so that you will know when each
message was received, see page 7.
Call Screening
When a caller is leaving a message
appears on the display.
Screening?
Pressing allows you to monitor the
OK
message being left without the caller
hearing you.
You can then press to accept the
call or to stop monitoring.
32