Base Settings; Change Pin Code; Dial Mode - BT FREELANCE XB2500 User Manual

Base settings

Change PIN code

Your System PIN can help prevent unauthorised users from
changing the settings on your phone.
Calls
1. Press the Left soft key
Vol.
2. Press or until the display shows
Calls
Redial
Calls
press ok.
Vol.
Vol.
Redial
3. Press or until
Calls
Redial
select. is displayed.
Pin? Vol.
Redial
4. Enter the existing PIN code using the keypad and press
is displayed.
neW Pin?
5. Enter a new 4 digit PIN code using the keypad and press
is displayed.
cOnFirM?
6. Re-enter the new PIN code and press
confirmation tone.
7. Press and hold to return to standby.

Dial mode

Your BT Freelance XB2500 is pre-set to tone dialling (DTMF).
You can set the dial mode to pulse dialling if your switchboard
requires.
Calls
1. Press the Left soft key
Vol.
2. Press or until the display shows
Calls
Redial
Calls
press .
OK Vol.
Vol.
Redial
3. Press or until the display shows
Calls
Redial
Calls
to select.
OK Vol.
Vol.
Redial
4. Press or to display either
Calls
Redial
You hear a confirmation tone.
Vol.
Redial
5. Press and hold to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
to open the main menu.
BS SeTTingS
is displayed, press
change Pin
. You hear a
OK
to open the main menu.
BS SeTTingS
DiaL MODe
or
TOne PULSe
The default PIN setting is 0000.
If you change your PIN, keep a note
of the new number somewhere safe.
and
to
OK
.
OK
.
OK
Tone is the default setting for the UK.
You should only have to change this
if connected to a switchboard that
requires Pulse dialling.
and
and press
and press .
OK
28