Set The Date And Time Format - BT FREELANCE XB2500 User Manual

Set the date and time format

Calls
1. Press the Left soft key
Vol.
2. Press or until the display shows
Calls
Redial
press soft key.
OK Vol. DaTe & TiMe
soft key again.
Redial
is displayed, press the
3.
DaTe FOrMaT
current format is displayed. Press
between - -
DD MM YY
Calls
will hear a confirmation tone.
Vol.
4. Press and
TiMe FOrMaT
Redial
and the current format is displayed. Press
between 24hr and 12hr. Press the
confirmation tone.
5. Press and hold the Right soft key
Set the date and time
Calls
1. Press the Left soft key
Vol.
2. Press or until the display shows
Calls
Redial
press the soft key.
Vol. OK
Calls
soft key again.
Redial
Vol.
3. Press or until the display shows
Calls
Redial
the soft key.
OK Vol.
Redial
4. The current time setting is displayed, enter 2 digits for the hour
and 2 for the minute using the 24hr format (eg for 10.54pm,
press 2 2
AB AB JK
L
C C
Calls
a confirmation tone.
Vol.
5. Press and
SeT DaTe
Redial
Press the soft key.
OK
6. The current date setting is displayed, enter 2 digits for the day,
2 for the month and 2 for the year using the dd-mm-yy format
(eg for 23rd May 2009 press
press the soft key, you will hear a confirmation tone
OK
7. Press and hold the Right soft key
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
to open the main menu.
hS SeTTingS
is displayed, press the
Calls
soft key
OK
Vol.
or
Calls
Redial
and - - . Press the
MM DD YY Vol.
Redial
is displayed. Press the
soft key, you will hear a
OK
to return to standby.
to open the main menu.
hS SeTTingS
is displayed, press the
DaTe & TiMe
SeT TiMe
) and press the soft
GH
OK
I
is displayed.
2
AB
DE
C F
to return to standby.
and
OK
and the
to change
soft key, you
OK
Calls
soft key
OK
Vol.
or to change
Calls
Redial
Vol.
Redial
and
OK
and press
key, you will hear
) and
JK WX
L
YZ
Your BT Freelance XB2500 uses the
24 hour clock.
If you have more than one handset
registered to your base, you only
need to set the date and time on one
handset and the other handsets will
be automatically updated.
7