To Record A Memo; To Playback A Memo; Memory Full; Recording Time - BT FREELANCE XB2500 User Manual

To record a memo

1. Press the Left soft key
Calls
press .
OK
Vol.
2. Scroll or to
Calls
Redial
Vol.
3. The display shows
recOrDing
Redial
Press when you have finished recording the memo.
OK
4. Press and hold to return to standby mode.

To playback a memo

A memo is played back as any other recorded message, see page
35 and 36.

Memory full

If the memory becomes full when a caller is leaving a message
the machine announces "Memory full, thank you for calling" and
hangs up.
When the memory is full, your answering machine will
automatically switch to Answer Only mode. You must delete
messages to allow for more messages to be recorded, see previous
page for instructions.

Recording time

Recording time allows you to set the amount of time that can be
allocated to an incoming message. The default is 180 seconds (3
minutes). You can change this to 60 or 120 seconds, or Unlimited.
When the allocated time is reached your BT Freelance XB2500 will
announce "Thank you for calling" and then hang up.
1. Press the Left soft key
Calls
press .
OK
Vol.
2. Press or until
Calls
Redial
Calls
to select.
Vol.
Vol.
Calls
Redial
3. Press or to display
Calls
Redial
Vol.
Vol.
4. Press or to select
Calls
Redial
Redial
and press
UnLiMiTeD
Vol.
Redial
5. Press and hold to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
, the display shows
and press .
MeMO OK
and you can leave a message.
, the display shows
is displayed and press
anS SeTTingS
and press
recOrD TiMe
,
60 Sec 120 Sec
.
OK
,
anS Machine
,
anS Machine
OK
.
OK
, or
180 Sec
37