Table of Contents
Advertisement
26
26
Base settings
Default (original setting) is Tone.
Default PIN is 0000
Please note that when ? is
displayed you must enter the digits
using the keypad before selecting
OK.
Dial mode
The available settings are tone and pulse.
1. Press
or
select
OK
option.
2. Press
or
until
OK
option.
3. The current setting is highlighted. Press
highlight the dial mode you require.
OK
4. Select
option and you will hear a confirmation tone.
5. Press and hold
Change the base PIN
Your BT Edge 2500 has a base PIN code which you will
need to change some of the base settings. You may wish
to change this to prevent unauthorised changes to your
settings.
1. Press
or
until
OK
select
option.
2. Press
or
until
OK
option.
3.
PIN code?
is displayed. Enter your current 4 digit code
(default
0000
) and select
until
Base Settings
is displayed then
Dial Mode
is displayed then select
to exit and return to standby.
Base Settings
is displayed then
PIN code
is displayed then select
OK
option.
or
to
Advertisement
Table of Contents
