Section Welcome… to your BT Edge 2100 digital cordless telephone Digital call quality with a range of up to 300 metres outdoors and up to 50 metres indoors. 100 Name and number directory. Caller Display* lets you see who is calling and keep track of unanswered calls.
Page 3
Need help? BT Edge 2000 handset If you have any problems setting up or using your BT BT Edge 2000 charger Edge 2100, contact the Helpline on 0870 605 8047. Mains power adaptor Alternatively, you may find the answer in ‘Help’...
Getting started Location WARNING Do not place your BT Edge 2100 in You need to place your BT Edge 2100 within 2 metres of the bathroom or other humid areas. the mains power socket and telephone socket so that the The BT Edge 2100 has a range of cables will reach.
Page 7
4. After 24 hours, plug one end of the telephone line cord The charge capacity of into your BT Edge 2100 base and the other end into the rechargeable batteries will reduce with time as they wear out, so telephone wall socket.
Page 8
Getting started Additionally, if you have purchased a BT Edge 2100 multiple pack. For each additional handset and charger: 1. Connect the power adaptor to the charger and switch on. 2. Insert the 2 x AAA NiMH batteries supplied into the handset.
Recall/Call Waiting/Intercom Redial/Pause For use with a switchboard/PBX Use to redial any of the last 20 and BT Calling Features, page 31. numbers called, page 20. For use with Call Waiting, page 34. Press to enter a pause in a Use to make internal calls, page 37.
Handset display icons – These are the symbols you will see on your handset’s screen. 09:30 BT Edge Handset name Keypad lock Edge 2100 The handset name is displayed in standby mode. Displayed when the keypad is locked. Handset number External The handset number is displayed in standby mode.
17. Page Power/In use light (GREEN) On when the power is on. Flashes when the handset is in use. Charging light (RED) Comes on when the BT Edge 2100 handset is charging on the base. Power / In Use Charging...
Getting to know your phone Navigating the menus Exit or go back one level in the menu Your BT Edge 2100 has an easy to use menu system. Press to go back one level or press and hold to return Each menu has a list of options, which you can see on to standby.
Getting to know your phone Menu map H H a a n n d d s s e e t t S S e e t t t t i i n n g g s s Base Settings R R e e g g i i s s t t r r a a t t i i o o n n Time Setting Base Ringer Volume Register Base...
Using the phone Make an external call Call timer Your handset will automatically 1. Lift the handset and press time the duration of all external calls. The handset display shows The green In Use light on the base flashes and the the call duration both during and icon is displayed.
Using the phone If auto answer is set to off, you will need to press at all times, see If your handset is off the base, press page 29. Earpiece volume During a call you can adjust the volume of the earpiece/handset receiver.
Using the phone Handsfree Handsfree lets you talk to your caller without holding the handset. It also enables other people in the room to listen to your conversation over the loudspeaker. Make a call in handsfree During a handsfree call, press to change the volume.
Using the phone Paging Paging calls cannot be answered by a handset. You can alert a handset user that they are wanted or locate a missing handset. 1. Press on the base. The paged handset(s) rings Page 2. Press to stop the paging ring Page The paging ring will stop automatically after one minute...
Using the phone 4. Enter the telephone number. (Enter the full telephone To enter a pause in a directory number, press the button. number including the dialling code if you subscribe to a For more information on pauses, Caller Display service and want the name of your caller see page 51.
Using the phone Edit a name and number 1. Select option. The first directory entry is displayed. 2. Use to scroll and find the entry you want to edit or search alphabetically. 3. Select Edit option. Edit Name and the name is displayed. 4.
Using the phone If you decide not to delete, select 3. Select option. Delete Entry? is displayed. Save option. 4. Select option to confirm. Entry Deleted is displayed and you hear a confirmation beep. 5. Press and hold to exit and return to standby. Redial The last 20 telephone numbers called are saved to a If the number is stored in the...
Using the phone Copy a number from the redial list to the directory 1. Press . The last number called is displayed. 2. Use to scroll to the number you want then select Copy option. Enter Name is displayed. 3. Enter a name using the keypad (as shown on page 16) then select option.
Using the phone Delete a redial number 1. Press . The last number called is displayed. 2. Use to scroll to the number you want then select Del option. Delete Entry? is displayed. 3. Select option to confirm. If you decide not to delete, select Save option.
Base settings Base ringer volume The base has 5 ringer volume settings: The default setting is 1. Press until Base Settings is displayed then select option. Base Ringer Volume is displayed, select option. You will hear a sample ring for all 3.
Base settings Dial mode 1. Press until Base Settings is displayed then select option. 2. Press until Dial Mode is displayed then select option. 3. The current setting is highlighted. Press highlight the dial mode you require. 4. Select option and you will hear a confirmation tone. 5.
Base settings Default settings Restore default settings Earpiece Volume You can restore your BT Edge 2100 to its default Handset and Base (original) settings. Please note this will delete your Ringer Volume phonebook, redial and calls list. Handset and Base Ringer Melody 1.
Handset settings Keypad lock You can lock the keypad so that it cannot be used accidentally while carrying it around. To lock the keypad: 1. Press then press . Display will show If you press any button while the Unlock keypad lock is on, the display will show Press Unlock then for 2 seconds and then returns...
Handset settings Handset ringer volume The handset has 5 ringer volume settings: Off and 1– 4 where, low and =high. The default setting is 1. Press until Handset Settings is displayed then select option. 2. Press until Handset Ringer Volume displayed then select option.
6. Press and hold to exit and return to standby. Handset warning tones Your BT Edge 2100 allows you to set beeps/warning tones to alert you to various situations. You can set a confirmation beep to sound each time a...
Handset settings Auto answer If you set Auto Answer to ON, when you receive an incoming call and the handset is in the base, you can pick it up to answer the call. You do not need to press 1. Press until Handset Settings is displayed...
Handset settings 4. Select option and you will hear a confirmation tone. 5. Press and hold to exit and return to standby. Handset language You can change the language that is shown on your handset display. The available languages include English, Français, Deutsch, Italiano and Espanol.
For more information on display (provided it is not withheld) prior to answering BT Calling Features call BT free on 0800 800 150. the call. It may take a couple of seconds for If your caller’s name and number are stored in the...
BT Calling Features 2. Use to scroll through the list. 3. To dial a displayed number, press The number will be dialled automatically and the display will show Dialling Or, Press and hold to exit and return to standby. When all new calls have been viewed...
BT Calling Features Delete a Calls list number 1. Select option. The most recently received number or name will be shown. 2. Use to scroll through the list to the number you want. 3. Select option. Delete Entry? Is displayed.
A quarterly fee is payable. For more information on BT Calling To use Call Waiting Features call BT free on 0800 800 150. To answer the second call, without disconnecting from...
Using additional handsets You can use up to five BT Edge 2000 additional handsets with your BT Edge 2100 to extend your phone system without needing to install extension sockets for each new phone. Your BT Edge 2100 handset can also be registered to up to 3 other bases.
When the base is located, your handset display will be updated with the handset number for the selected base. Select a base If your BT Edge 2100 handset is registered to more than one base, you can select which base to use. Alternatively, if you select...
Using BT Edge 2000 additional handsets De-register a handset You cannot de-register the handset you are using. 1. Press until Registration is displayed, then select option. 2. Press until De-Register Handset displayed, then select option. 3. Enter your 4 digit PIN, then select option.
Using BT Edge 2000 additional handsets During your call: 1. Press and hold . Your external caller will be put on hold and will hear a tone. Transfer To Handset displayed. 2. Enter the handset number that you want to transfer the call to and then press OK.
General BT accepts no responsibility for damage caused to your BT Edge 2100 by using any other types of batteries. Phone does not work Have you installed the batteries correctly? See pages 6-7.
Page 40
Help Cannot dial out or receive calls Check that the mains power is correctly connected. The batteries may need recharging. Has there been a power cut? If so, place the handset back on the base for 10 seconds and try again. If it still does not work disconnect the batteries and mains power for 10 minutes, then reconnect and try again.
Page 41
Help No display The batteries may be flat, dead or incorrectly inserted. Recharge or replace the batteries. icon flashes Is the handset registered correctly to the base, see page 35. Check that the mains power is correctly connected. Check that the handset is within range of the base. icon flashes The batteries are low, place the handset on the base to recharge.
Page 42
Cannot register a handset to a base You can register a total of 5 handsets to your BT Edge 2100 base and you can register your BT Edge 2100 handset to up to 4 bases. Check that you have not exceeded the limits.
Page 43
Help You may have a faulty line or socket. Try using another socket or line. Call BT on 151 if you still experience problems. Base charging light not working Try cleaning the charging contacts on the base. Check that the mains power is correctly connected.
This product is intended for 872260. If you have purchased a BT Edge 2100 multiple connection to analogue public pack, the item code for the charger mains power supply...
General information Your product may interfere with other electrical equipment, e.g. TV and radio sets, clock/alarms and computers if placed too close. It is recommended that you place your product at least one metre away from such appliances to minimise any risk of interference. Never dispose of batteries in a fire.
Guarantee Your BT Edge 2100 is guaranteed for a period of 12 months from the date of purchase. Subject to the terms listed below, the guarantee will provide for the repair of, or at BT’s or its agent’s...
Page 47
The guarantee shall only apply to defects that occur within the 12 month guarantee period. Proof of purchase is provided. The equipment is returned to BT or its agent as instructed. This guarantee does not cover any faults or defects...
Equivalence Number (REN), which is used to calculate the number of items which may be connected to any one telephone line. Your BT Edge 2100 has a REN of 1. A total REN of 4 is allowed. If the total REN of 4 is...
Only use approved base mains power supply, item code: 872260. Serial number: If you have purchased a BT Edge 2100 multiple pack, the item code for the charger mains power supply is 021299. For guarantee purposes proof of Only use approved batteries.
Hereby, Suncorp Technologies declares that this BT Edge 2100 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The Declaration of Conformance for the BT Edge 2100 is published on the website: http://www.suncorptech.com/bt BT accessories and...
You may need to use the recall function if you are connected to a switchboard/PBX (Private Branch Exchange), contact your PBX supplier for further information. The recall function is set to timed break recall and is also used for BT Calling Feature.