Installation Guide - Bell EXPRESSVU 2700 Installation And Setup

Installation Guide

¥ We recommend that the outdoor components of the antenna system be grounded in
accordance with local, provincial, and national codes.
¥ We strongly recommend using an outlet that contains surge suppression or ground fault
protection. For added protection during a lightning storm, or when the receiver is left
unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the lines between the receiver and the antenna. This will prevent damage
caused by lightning or power line surges.
¥ Do not locate the antenna near overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing the
antenna, take extreme care to avoid touching such power lines or circuits, as contact
with them can be fatal.
¥ Do not attempt to service the receiver yourself, as opening or removing covers (except
for the Smart Card access door on the receiver front panel) may expose you to
dangerous voltage, and will void the warranty. Refer all servicing to authorized
service personnel.
¥ Unplug the receiver from the wall outlet and refer servicing to authorized service
personnel whenever the following occurs:
The power supply cord or plug is damaged;
Liquid has been spilled, or objects have fallen into the receiver;
The receiver has been exposed to rain or water;
The receiver has been dropped or the chassis has been damaged;
The receiver exhibits a distinct change in performance.
¥ When replacement parts are required, ensure that the service technician uses
replacement parts specified by the manufacturer. Unauthorized substitutions may
damage the receiver or cause electrical shock or fire, and will void the warranty.
¥ Upon completion of any service or repair to the receiver, ask the service technician to
perform safety checks to ensure that the receiver is in proper operating condition.
Page ii