Dhcp Mode - NetComm V210P User Manual

DHCP Mode

1. Click on WAN on the left menu.
2. Change the IP Type to DHCP.
3. After that, click the Submit button.
Option Description
DNS Server 1 The Domain Name Service that the NetComm ATA uses to resolve domain names to IP addresses. This is usually your modem / Router or the
primary DNS server specified by your Internet Service Provider (ISP). (Optional)
DNS Server 2 The Domain Name Service that the NetComm ATA uses to resolve domain names to IP addresses. This is usually your modem / router. DNS 2
can be a different address to DNS 1 to provide a backup DNS server if DNS 1 fails. (Optional)
MAC The Ethernet MAC address of the WAN interface. (Optional)
Host Name The host name of the VoIP Gateway. (Optional)
4. Click on Save Settings/Reboot on the left menu and then click the Save & Reboot button to save
your settings.
5. The NetComm ATA will reboot automatically to make your changes effective. Please wait while it reboots.
VoIP Adapter User Guide
14
YMLV21014 YMLV21014 V21014
www.netcomm.com.au