NetComm V110 User Manual
  1. Manuals
  2. Brands
  3. NetComm Manuals
  4. VoIP
  5. V110
  6. User manual
NetComm V110 User Manual

NetComm V110 User Manual

Voip ata
Hide thumbs Also See for V110:
Table of Contents

Advertisement

Quick Links

Download this manual
User Guide
V110, V210P, V211, V220
VoIP ATA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V110 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NetComm V110

Summary of Contents for NetComm V110

  • Page 1 User Guide V110, V210P, V211, V220 VoIP ATA...
  • Page 3 Welcome to the WonderfUl World of VoIP congratulations on your purchase of a netcomm VoIP AtA. Whether this is your first VoIP device or you are upgrading from another device we’re glad to have you as part of the NetComm family. The NetComm V110/V210P/V211/V220 ATA’s are true next generation technology and in addition to the fantastic savings...

  • Page 4: Voip Ata Features

    • Phone book • Flash call function • Call Hold • Call Waiting • Call Forward • Caller ID • 3-way conference Auto Provisioning • HTTP • FTP • TFTP nAt traversal • STUN configuration • Web Browser • IVR/Keypad YML881Rev1 www.netcomm.com.au...

  • Page 5: Package Contents

    DC12 volts/0.6 A Power Supply Unit • One RJ-11 telephone cable (V210P / V211 only) mInImUm SyStem reQUIrementS Before continuing with the installation of your Netcomm V2xx ATA, please confirm that you comply with the minimum system requirements: • Broadband (ADSL or Cable ) connection •...

  • Page 6: Ports And Buttons

    The Reset button will set the NetComm ATA to its factory default setting and reset the unit. You may need to reset the NetComm ATA into its factory defaults if you loose the ability to enter the NetComm ATA via the web interface, or following a software upgrade.

  • Page 7: Led Indicators

    This LED illuminates to indicate the system is powered. This LED illuminates when the NetComm ATA is registered successfully to the SIP server. This LED illuminates when a connection is established to WAN/LAN port and flashes when WAN/LAN port is sending/receiving data.

  • Page 8: Default Settings

    You have purchased the router from someone else and need to reconfigure the device. • You are asked to perform a factory reset by a member of the excellent NetComm Support Staff. In order to restore your router to its factory default settings, please follow these steps: •...

  • Page 9: Hardware Installation

    For V210P or V211 unit, connect the Line port to your PSTN wall socket. Connect the AC power adaptor and press the power button to turn the ATA on. The ATA will boot up and in a few minutes, the Power and Ethernet Lights will light up. Note: Only use the power adapter supplied with the NetComm ATA. A different adapter may damage the product. YML881Rev1 www.netcomm.com.au ��11 and ��1��...
  • Page 10 �11��� ��1���� ��11�� ���� User Guide 1� �11� ���� YML881Rev1 www.netcomm.com.au...

  • Page 11: Software Configuration

    Enter the SIP Proxy Domain, Proxy Server, Outbound Proxy, Username, Auth. ID and Auth. Password provided by your VSP. And then click on Setup, the software will start to configure the NetComm ATA. Follow the instructions of the Easy Setup utility which will guide you to complete the configuration.

  • Page 12: Configuration Via A Web Browser

    Accessing the web configuration Open your Web browser (e.g. Internet Explorer, Firefox). Enter the LAN port default IP address of the NetComm ATA (e.g. http://192.168.22.1) in the address bar and press Enter. At the login screen, enter the gateway username and password. The default login username is admin, and the default login password is admin.

  • Page 13: Wan Configuration

    V2xx ATA with an Optus cable modem or connecting the V2xx ATA to another router / gateway. • PPPoE Client, to connect to a network with PPPoE service. Mostly used to connect the V2xx ATA to a bridge ADSL modem. YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide...

  • Page 14: Static Ip Configuration

    Internet. This is usually your modem / router. dnS Server 1 The Domain Name Service that the NetComm ATA uses to resolve domain names to IP addresses. This is usually your modem / Router or the primary DNS server specified by your Internet Service Provider (ISP).
  • Page 15 Click on Save Settings/Reboot on the left menu and then click the Save & Reboot button to save your settings. The NetComm ATA will reboot automatically to make your changes effective. Please wait while it reboots. YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ����...

  • Page 16: Dhcp Mode

    Click on Save Settings/Reboot on the left menu and then click the Save & Reboot button to save your settings. The NetComm ATA will reboot automatically to make your changes effective. Please wait while it reboots. �11��� ��1���� ��11�� ���� User Guide YML881Rev1 www.netcomm.com.au...
  • Page 17 The name of your service provider. (Optional) Click on Save Settings/Reboot on the left menu and then click the Save & Reboot button to save your settings. The NetComm ATA will reboot automatically to make your changes effective. Please wait while it reboots. YML881Rev1 www.netcomm.com.au �11���...

  • Page 18: Voip Configuration

    VoIP configuration Click on VoIP on the left menu. Click on SIP Service Provider. Enter the information supplied by your VoIP service provider and click Submit. �11��� ��1���� ��11�� ���� User Guide YML881Rev1 www.netcomm.com.au...
  • Page 19 Active If set to on, the NetComm ATA will attempt to register with your VoIP service provider using this account. SIP Proxy domain The SIP Proxy Domain is specified by your VSP. Proxy Server The host name of IP address of the SIP server. The proxy server is responsible for forwarding requests received from the NetComm ATA to your VoIP service provider.

  • Page 20: Advanced Configuration

    AdVAnced confIGUrAtIon Your NetComm ATA has many advanced features that you may want or need to use in the future. Let’s start by taking a look at the menus in the web interface. Open your Web browser (Internet Explorer, Firefox etc).

  • Page 21: System Information Page

    Status Page You can view the current Network setting in this page. VoIP Status Page The page shows current status of VoIP SIP Service provider. YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide �1...
  • Page 22 The PPPoE setting is to setup the PPPoE Username and Password. If you have the PPPoE account from your Service Provider, please enter the Username and the Password correctly. �11��� ��1���� ��11�� ���� User Guide �� YML881Rev1 www.netcomm.com.au...
  • Page 23 The end of the IP address given by the DHCP server when the DHCP server is enabled. lease time The lease time for the DHCP address. YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide �...
  • Page 24 The VoIP Gateway Configuration page sets parameters for all VoIP application. The VoIP Gateway Configuration page is divided into four general categories: SIP Setting, Phone Book, Phone Setting, and Others. �11��� ��1���� ��11�� ���� User Guide � YML881Rev1 www.netcomm.com.au...
  • Page 25 The Proxy Server is specified by your VoIP service provider. display name The name or number the called party sees when you call them. YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide �...
  • Page 26 SIP Port The port on the SIP server that receives requests from the ATA. Default: 5060. rtP Port The base port to receive RTP packets. Default: 60000. �11��� ��1���� ��11�� ���� User Guide � YML881Rev1 www.netcomm.com.au...
  • Page 27 Id Setting You can set the value of Codec ID in this page. Please leave as default unless otherwise specified by your VoIP Service Provider. YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide �...

  • Page 28: Dtmf Setting

    The QoS setting is to set the voice packets priority. If you set the value higher than 0, then the voice packets will get the higher priority to the Internet. But the QoS function still needs to cooperate with the others Internet devices. �11��� ��1���� ��11�� ���� User Guide �8 YML881Rev1 www.netcomm.com.au...
  • Page 29 Display the URL or number that you configured Select Select the item. delete Selected Delete selected item [Button] delete All [Button] Delete all items reset [Button] Reset selected item YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide �...
  • Page 30 4: Position: 3, name: “john”, number: 003, Url: 88888888 When the user dials the Number 003, it will dial to the VoIP User whose phone number is 88888888. �11��� ��1���� ��11�� ���� User Guide � YML881Rev1 www.netcomm.com.au...
  • Page 31 (e.g. 00 1 999 888 7777). example 7: When dial a VoIP Phone number which isn’t configured in the name [Speed dial number] list, it’ll dial out the VoIP Phone number. YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide...

  • Page 32: Phone Setting

    Enable call forward for URL/number. PStn (optional) Enable call forward for PSTN phone number. only for V211. All fwd no. The URL/number you configured will be forward to for All Forward �11��� ��1���� ��11�� ���� User Guide � YML881Rev1 www.netcomm.com.au...
  • Page 33 4: All forward: IP, name.: 7777, Url/number: 7777 If you are on the phone, the new incoming call will forward to the VoIP phone number 7777. YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide...
  • Page 34 8: All forward: PStn, name.: 88888888, Url/number: 88888888 If you can not answer the phone after 3 rings, the incoming call will forward to the PSTN phone number 88888888. �11��� ��1���� ��11�� ���� User Guide YML881Rev1 www.netcomm.com.au...
  • Page 35 “To” time, the block time will from day 1 to day 2. from Enter the start time of the time period. (24 hours format, hh:mm) Enter the end time of the time period. (24 hours format, hh:mm) YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide...
  • Page 36 Turn on to make the gateway prompt for a pin code before placing the call. PIn code Enter the pin code required to be entered by the caller to make a call. �11��� ��1���� ��11�� ���� User Guide YML881Rev1 www.netcomm.com.au...
  • Page 37 When you hear the dial tone indicating that the VoIP Gateway is expecting a number, dial the PSTN phone number to which you want to call, then press # (optional) to make a VoIP to PSTN call. YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide...
  • Page 38 Single caller Id Enable to detect Single Caller ID cId Without time Enable to detect the Caller ID without time. cId type 2 Enable to detect the Caller ID Type 2. �11��� ��1���� ��11�� ���� User Guide YML881Rev1 www.netcomm.com.au...
  • Page 39 Auto dial time Determines the time the ATA will wait before making the call after the last digit has been dialed. Symbol explain: x or X 0,1,2,3,4,5,6,7,8,9 (Wildcard) YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide...
  • Page 40 [006+xxx] will be dialed out. For example, when you dial the number 0095555 and the digits 009 will be replaced to 006 and then the real phone number 0065555 will be dialed out. �11��� ��1���� ��11�� ���� User Guide � YML881Rev1 www.netcomm.com.au...
  • Page 41 When the number 358822 have been dialed, the prefix 007 will not be added and the real phone number 358822 will be dialed out due to 358822 (6 digits) is not in the rule 35xx (4 digits). YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide...
  • Page 42 (fAx) Setting You can enable/disable the T.38 FAX function in this page. options description t.38 (fAx) Switch on to enable T.38 fax support. t.38 Port Default is 60000. �11��� ��1���� ��11�� ���� User Guide � YML881Rev1 www.netcomm.com.au...
  • Page 43 2: Use hot line: enable, hot line number: 192.168.10.63 Every time you pick up the phone, it will establish a call to the SIP device at the IP address 192.168.10.63. YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide...
  • Page 44 Enter IP or Host Name of FTP Server. ftP Username Enter Username which provided by FTP Server. ftP Password Enter Password which provided by FTP Server. file Path Enter the path where the provisioning file is located. �11��� ��1���� ��11�� ���� User Guide YML881Rev1 www.netcomm.com.au...
  • Page 45 Every time when you power on the VoIP Gateway, it will update its VoIP configuration to the latest one from Auto Provisioning Server (FTP Server) automatically. YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide...
  • Page 46 StUn When enabled the NetComm ATA uses STUN (Simple Transversal of UDP through NAT) if the unit is behind a NAT enabled router and the router has no ALG for SIP, or NONE to disable STUN (VoIP Gateway is not to use STUN for NAT traversal). VoIP Gateway also supports a proprietary implementation of NAT traversal where the Service provider is expected to provide some relay support.
  • Page 47 Some ISPs have a restriction that allows only 1 host locked by its MAC address to talk on the internet. If you change network cards, you have to call them up to change the MAC. The NetComm ATA can clone the computer’s MAC that was originally set up in this configuration.
  • Page 48 This allows you to discover the ATA from a remote location when the ATA is used with a dynamically assign IP address service. example: Configure the WAN connection to PPPoE Client and make sure the ATA has the WAN IP Address (Public IP Address). �11��� ��1���� ��11�� ���� User Guide YML881Rev1 www.netcomm.com.au...
  • Page 49 Enable DDNS and configure the DDNS settings including Host Name, User Name and Password If configured correctly, you should be able to visit the home page of the ATA by entering the DDNS Host Name as follow. YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide...

  • Page 50: Vlan Settings

    IP address of the DMZ computer and click Submit. The computer with that IP address can then serve web pages or games to the outside world, while the rest of your network remains private. �11��� ��1���� ��11�� ���� User Guide � YML881Rev1 www.netcomm.com.au...

  • Page 51: Virtual Server

    Select the item of the Virtual Server enable Selected Enable selected item [Button] delete Selected Delete selected item [Button] delete All [Button] Delete all items reset [Button] Reset selected item YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� �11��� ��1���� ��11�� ���� User Guide...
  • Page 52 Num: 0, Server IP: 10.0.0.150, Protocol: TCP, Internal Port: 21, External Port: 21 Other people can visit your FTP Server by entering the WAN IP Address of the ATA and then the NetComm ATA will re-directly it to your LAN IP 10.0.0.150.
  • Page 53 Secure HTTP (HTTPS) rlogin rexec talk ntalk Routing Information Protocol (RIP) 1701 Layer 2 Tunneling Protocol (L2TP) 2000 Open Windows 2049 Network File System (NFS) 6000 YML881Rev1 www.netcomm.com.au �11��� ��1���� ��11�� ���� User Guide �11��� ��1���� ��11�� ����...

  • Page 54: Sntp Settings

    SntP Settings Simple Network Time Protocol (SNTP) can be used to sync the time on the NetComm ATA. If SNTP is enabled, your ATA clock is synchronized with an Internet time server once a day. However, if you don’t have a continuous Internet connection through a cable modem or DSL modem, the automatic synchronization might not always occur.

  • Page 55: Alarm Settings

    Alarm time Default is 0:0 (hh:mm). Set the Alarm Time. (24 hours format, hh:mm) current time The current time of the NetComm ATA. example 1: Alarm: on, Alarm time: 8:1(hh:mm) The alarm will sound when it reached the current time 08:01.

  • Page 56: System Authority

    Save Settings/reboot If modifications are made to the Netcomm ATA’s settings, they will be lost if they are not saved to the ATA non- volatile memory. Click Save & Reboot button to make any configuration changes permanent. After you click the Save &...

  • Page 57: Firmware Update Page

    System reset factory default Page You can restore the NetComm ATA settings to factory default by clicking the restore button. The ATA will restore to default and automatically restart. firmware Update Page To update the NetComm ATA firmware, click browse to locate the new firmware or enter the location and name of the firmware in the File Location field.
  • Page 58 Auto Update Page The NetComm ATA can check and update the firmware automatically either when powering up or via a schedule. options description Update via Enable or disables the Auto Update function. To enable, select the type of auto update server –...
  • Page 59 Be noted: If the NetComm ATA is powered off and has passed the Next update time, it will not update the firmware after you power on the NetComm ATA. It’ll only update when the NetComm ATA is power on and reaches Next update time.
  • Page 60 IVr Interface for VoIP Gateway You can use the PSTN phone to configure the NetComm ATA. Please follow the instruction below to configure it. Group IVr Action IVr menu choice Function Reboot #195# Function Factory Reset #198# Info Check IP Address...

  • Page 61: How To Make A Phone Call

    The VoIP Gateway also provides some functions that list as below: call features The NetComm ATA also provides some functions that list as below: Blind transfer This feature allows a user (transferor) to transfer an existing call to another telephone number (transfer target) without connecting to the transfer target number.

  • Page 62: Way Conferencing

    Hold key again to keep talking. You can push the Flash button to switch between the two calls. �11��� ��1���� ��11�� ���� User Guide � YML881Rev1 www.netcomm.com.au...
  • Page 63 The power switch is turn on. (Both at the power point and the power switch at the back of the unit). note: only use the power adapter supplied with the netcomm AtA. A different adapter may damage the product. eth light is off.

  • Page 64: Appendix A: Glossary

    A business that provides a VoIP service, allowing a user to connect to the internet in order to make VoIP phone calls using VoIP Gateway. The VoIP service provider sets up a SIP account for the user. �11��� ��1���� ��11�� ���� User Guide YML881Rev1 www.netcomm.com.au...

  • Page 65: Product Warranty

    To the extent permitted by the Relevant Acts, in relation to your product and any other materials provided with the product (“the Goods”) the liability of NetComm under the Relevant Acts is limited at the option of NetComm to: •...
  • Page 66 ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ �11��� ��1���� ��11�� ���� User Guide YML881Rev1 www.netcomm.com.au...
  • Page 67 Due to faster ADSL speeds, an inline ADSL2+ Microfilter stops your ADSL connection being disrupted by telephones connected to the same line. older filters cannot handle these speeds. A high-quality Microfilter from NetComm will ensure you have a stable broadband Internet connection with no reduction in the quality of your telephone service.

  • Page 68: Contact Information

    Note: NetComm Technical Support for this product only covers the basic installation and features outlined in the Quick Start Guide. For further information regarding the advanced features of this product, please refer to the configuring sections in the User Guide or contact a Network Specialist.

This manual is also suitable for:

V210pV211V220

Table of Contents