System Authority; Save/Reboot; System; Reset Factory Default - NetComm V210P User Manual

System Authority

In the System Authority page you can change the NetComm ATA's login name and password.
Save Settings/Reboot
If modifications are made to the Netcomm ATA's settings, they will be lost if they are not saved to the ATA non-volatile memory. Click Save
& Reboot button to make any configuration changes permanent. After you click the Save & Reboot button, the ATA will automatically restart
and the new setting will take effect.
If you only want to reboot the NetComm ATA, Click the Reboot Only button. After you click the Reboot Only button, the ATA will
automatically restart.

System

Reset factory default Page
You can restore the NetComm ATA settings to factory default by clicking the restore button. The ATA will restore to default and
automatically restart.
Firmware Update Page
To update the NetComm ATA firmware, click browse to locate the new firmware or enter the location and name of the firmware in the File
Location field. Click Update, to upgrade the firmware to the new version.
YMLV210
www.netcomm.com.au
NetComm Express Series - VoIP Adapter
TM
VoIP Adapter User Guide
43