Table of Contents
Advertisement
dhcP mode
1.
Click on WAN on the left menu.
2.
Change the IP Type to DHCP.
3.
After that, click the Submit button.
option
dnS Server 1
dnS Server 2
mAc
host name
4.
Click on Save Settings/Reboot on the left menu and then click the Save & Reboot button to save
your settings.
5.
The NetComm ATA will reboot automatically to make your changes effective. Please wait while it reboots.
�11��� ��1���� ��11�� ���� User Guide
1
description
The Domain Name Service that the NetComm ATA uses to resolve domain names to IP
addresses. This is usually your modem / Router or the primary DNS server specified by
your Internet Service Provider (ISP). (Optional)
The Domain Name Service that the NetComm ATA uses to resolve domain names to
IP addresses. This is usually your modem / router. DNS 2 can be a different address to
DNS 1 to provide a backup DNS server if DNS 1 fails. (Optional)
The Ethernet MAC address of the WAN interface. (Optional)
The host name of the VoIP Gateway. (Optional)
YML881Rev1
www.netcomm.com.au
Advertisement
Table of Contents
Need help?
Do you have a question about the V110 and is the answer not in the manual?
Questions and answers