Codec Settings - NetComm V210P User Manual

Port Setting
You can configure the SIP and RTP port number in this page. Please leave as default unless otherwise specified by your VSP.
Options
SIP Port
RTP Port

Codec Settings

You can set the Codec Priority, RTP Packet Length, and VAD (Voice Activity Detection) settings in this page. Please leave as default unless
otherwise specified by your VSP.
Codec ID Setting
You can set the value of Codec ID in this page. Please leave as default unless otherwise specified by your VoIP Service Provider.
YMLV210
www.netcomm.com.au
NetComm Express
Description
The port on the SIP server that receives requests from the ATA. Default: 5060.
The base port to receive RTP packets. Default: 60000.
Series - VoIP Adapter
TM
VoIP Adapter User Guide
23