Turn Signal And Taillight Bulb Replacement; Troubleshooting - Yamaha Virago XV535 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1
1. Screw (´ 2)
Turn signal and taillight bulb
replacement
1. Remove the screws and the lense.
1
1. Bulb (´ 2)
2. Push the bulb inward and turn it
EAU00855
counterclockwise.
3. Place a new bulb in the socket.
Push the bulb inward and turn it
clockwise until it engages into the
socket.
4. Install the lense and the screws.
CAUTION:
Do not over-tighten the screws as
the lense may break.

Troubleshooting

Although Yamaha motorcycles receive
a rigid inspection before shipment from
the factory, trouble may occur during
1
operation.
Any problem in the fuel, compression,
or ignition systems can cause poor
starting and loss of power. The trouble-
shooting chart describes a quick, easy
procedure for making checks.
If your motorcycle requires any repair,
bring it to a Yamaha dealer. The skilled
technicians at a Yamaha dealership
have the tools, experience, and know-
how to properly service your motor-
cycle. Use only genuine Yamaha parts
on your motorcycle. Imitation parts may
EC000108
look like Yamaha parts, but they are of-
ten inferior. Consequently, they have a
shorter service life and can lead to ex-
pensive repair bills.
6-29
EAU01008