Air Filter - Yamaha Virago XV535 Owner's Manual

Final gear case capacity:
0.19 L
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
If desired, an SAE 80W90 hypoid
gear oil may be used for all
conditions.
NOTE:
ÒGL-4Ó is a quality and additive rating.
Hypoid gear oils rated ÒGL-5Ó or ÒGL-6Ó
may also be used.
5. Install and tighten the filler bolt to
the specified torque.
Tightening torque:
Oil filler bolt:
23 Nm (2.3 mákg)
6. After replacing the final gear oil, be
sure to check for oil leakage.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Fuel tank
2. Bolt (´ 3)

Air filter

The air filter should be cleaned at the
specified intervals. It should be cleaned
more frequently if you are riding in un-
usually wet or dusty areas.
1. Remove the seats. (See page 3-7
for seat removal and installation
procedures.)
2. Remove the fuel tank bolts.
6-10
1. Screw
3. Lift the front of the fuel tank up-
EAU02998
ward and position it away from the
air filter. (Do not remove the fuel
tank.)
Support the fuel tank carefully
l
during this procedure.
Do not tilt the fuel tank too
l
much or pull it too hard be-
cause the fuel hose connec-
tions may
causing fuel leakage.
4. Remove the air filter case cover
screw.
EW000071
become loose