ITEM
Sidestand pivot
Chassis fasteners
Fuel tank
Lights, signals and
switches
Battery
NOTE:
Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be thoroughly accom-
plished in a very short time; and the added safety it assures is more than worth the time involved.
If any item in the PRE-OPERATION CHECK is not working properly, have it inspected and repaired before operating
the motorcycle.
¥ Check for smooth operation.
¥ Lubricate if necessary.
¥ Make sure that all nuts, bolts and screws are properly tightened.
¥ Tighten if necessary.
¥ Check fuel level.
¥ Fill with fuel if necessary.
¥ Check for proper operation.
¥ Check fluid level.
¥ Fill with distilled water if necessary.
PRE-OPERATION CHECKS
CHECKS
4-2
PAGE
6-23
Ñ
3-5 ~ 3-6
6-27 ~ 6-29
6-25 ~ 6-26