Front Wheel Installation; Rear Wheel Removal - Yamaha Libero 65 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Stopper

Front wheel installation

When installing the front wheel,
reverse the removal procedure.
Pay attention to the following points:
1. Make sure the slot in the brake
shoe plate fits over the stopper on
the front fork outer tube.
2. Make sure the axle nut is properly
torqued and a new cotter pin is
installed.
WARNING
Always use a new cotter pin.
Axle nut torque:
33 ft-lb (4.55 m-kg)
3. Adjust the free play in the brake
lever.
6-30

Rear wheel removal

WARNING
• It is advisable to service the
wheel by a YAMAHA dealer.
• S e c u r e l y s u p p o r t t h e
Motorcycle so there is no
danger of it falling over.