Checking The Brake Shoes; Drive Chain Slack Check - Yamaha Libero 65 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Wear limit line
2. Wear indicator

Checking the brake shoes

A wear indicator is provided on each
b r a k e . T h i s i n d i c a t o r a l l o w s
inspection of shoe wear without
disassembling the brake. Apply the
brake and inspect the position of the
indicator. If the indicator reaches to
the wear limit line, ask a YAMAHA
dealer to replace the shoes.
1. Wear limit line
2. Wear indicator
6-18
1. Free play

Drive chain slack check

NOTE :
Spin the wheel several times and
find the tightest position of the
chain. Check and/or adjust the
chain slack while it's in this tightest
position.
Inspect the drive chain when the
Motorcycle is on the centerstand.
Check the slack at the position
shown in the illustration. Normal
slack is approximately 20 ~ 30 mm.
If the slack exceeds 30 mm, adjust.