Oven Lamp - AEG BE2000201 User Manual

Aeg oven
Table of Contents

Advertisement

22
Care and cleaning
2.
Pull the shelf support from the back of
the side wall to remove it.
To install the shelf support follow the proce-
dure in reverse.
Valid with telescopic runners:
The retaining pins on the telescopic shelf
runners must point to the front!

Oven lamp

WARNING!
There is a risk of electrical shock.
The oven lamp and the lamp glass cover can be hot.
Before you change the oven lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp
glass cover and the cavity.
Replacing the oven lamp:
1.
You can find the lamp glass cover at the cavity ceiling.
Turn the lamp glass cover counterclockwise to remove it.
2.
Clean the glass cover.
3.
If necessary, replace the oven lamp with applicable 300 °C heat-resistant oven lamp.
Use the same oven lamp type.
4.
Install the glass cover.
Ceiling
You can fold down the heating element on the ceiling to clean the ceiling easily.
WARNING!
Before you fold down the heating element, deactivate the appliance. Make sure that the
appliance is cold. There is a risk of burns!
2
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Be2000001Bp5303001Be2003001

Table of Contents