Oven Lamp; Cleaning The Oven Door; Removing The Door - AEG 47056VS User Manual

11.2 Oven lamp

WARNING!
Be careful when you change the
oven lamp. There is a risk of elec-
trical shock.
Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or
deactivate the circuit breaker.
Put a cloth on the bottom of the
oven to prevent damage to the
oven light and glass cover.
Replacing the oven lamp
1. You can find the lamp glass cover at
the back of the cavity.
Turn the lamp glass cover counter-
clockwise to remove it.
2. Clean the glass cover.
3.
Replace the oven lamp with an ap-
plicable 300 °C heat-resistant oven
lamp.

Removing the door:

1
When the cleaning procedure is comple-
ted, insert the oven door in the opposite
sequence. Make sure that you hear a
click when you insert the door. Use force
if necessary.
2
Use the same oven lamp type.
4. Install the glass cover.

11.3 Cleaning the oven door

To make the cleaning easier, remove the
door.
WARNING!
Make sure that the glass panels
are cool before you clean the
glass door. There is a risk that
the glass could break.
WARNING!
When the door glass panels are
damaged or have scratches, the
glass becomes weak and can
break. To prevent this, you must
replace them. For more instruc-
tions, contact your local Service
Centre.
1. Open the door fully.
2. Move the slider until you hear a click.
3.
Close the door until the slider locks.
4. Remove the door.
To remove the door, pull the
door outwards first from one
side, and then the other.
11.4 Oven glass panels
The door glass on your product
can be different in type and
shape from the examples you
see in the diagrams. The number
of glasses can also be different.
ENGLISH
27