Position Information - Becker TRAFFIC ASSIST PRO Z 250 Operating Instructions Manual

Hide thumbs Also See for TRAFFIC ASSIST PRO Z 250:
Table of Contents

Advertisement

> Press the preview area while route
guidance is active and the toolbar
deactivated.
The bar display indicates the volume.
> Press
or
to increase or
decrease the volume.
> Press
in order to mute the
announcements.
> Press
again in order to cancel the
mute function.
!Warning
Always adjust the volume so that you
can still hear any ambient noise while
driving.
The bar display disappears again automat-
ically after three seconds if no button is
pressed.
Note:
The volume can also be changed using
the volume control located on the side.
See "Volume control" on page 34..
Additional information
At the left edge of the screen, information
(estimated time of arrival, remaining jour-
ney time and remaining distance to desti-
nation/stopover) regarding the main des-
tination
and the stopover
1
displayed/hidden. The left display win-
dow shows the hidden information.
1
2
Note:
Additional information can only be
switched on/off, if the option
was selected in
Map mode
Route info key" on page 60.
NAVIGATIONAL MODE

Position information

If you require information regarding a cer-
tain point on the map display, the infor-
mation window can be opened. This dis-
plays information on the selected point (if
any is stored in the map data) and pro-
vides various functions for further action.
> Move or zoom the map until you see the
desired point.
> Press and hold on the desired point un-
til the information window appears.
can be
2
Make the necessary selection as necessary,
See "Navigation menu: Select on map" on
page 52.
Full map
under "The
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
75

Advertisement

Table of Contents
loading

Table of Contents