Tmc On The Route; Point Of Interest On The Route - Becker MAP PILOT Operating Manual

>>> NAVIGATION MODE
Simulating a route
You can also start a simulation of the
> D
route.
> GB
> With the entire route displayed, select
.
Options
> F
> Select
Simulation
The route is simulated at four times the
> I
normal speed.
> E
Pressing
C
noeuvre.
> P
The simulation can be cancelled by press-
ing the L button.
> NL
> DK

TMC on the route

You can view and edit TMC messages lo-
> S
cated on your route.
> N
Note:
The TMC messages that have led to a
> FIN
change in the route are also displayed.
> TR
> In the My Route menu, select
> GR .
route
> PL
> CZ
> H
> RUS
38
.
switches to the next ma-
TMC on
The TMC messages located on your route
are displayed.
Once you have selected a message you can
decide e.g. whether or not to divert
around the hold-up. Please also refer to
the description in "Traffic announce-
ments using TMC" on page 30.

Point of interest on the route

During route guidance, you can display
the points of interest located on the route.
You can specify which categories of points
of interest should be displayed, and you
can also choose whether to display only
the nearest POIs, all the POIs on the en-
tire route, or only POIs near the destina-
tion.
> In the My Route menu, select
.
route
The nearest points of interest for the three
selected categories are displayed.
The distance indicated shows the distance
to the point of interest. The points of in-
terest are displayed on the map on the left-
hand side.
After selecting one of the points of inter-
ests you can start route guidance to it.
Setting categories
> Select
.
More...
1
2
POI on
> Select
Select POI categories
> Then select the desired categories.
3
.