Becker MAP PILOT Operating Manual page 23

Starting route guidance
> In the address input menu, select
to start route guidance.
guidance
All data entered thus far is processed when
calculating the route. The map will then
be displayed and the route guidance will
begin.
Note:
The symbols above the address refer to
restrictions that you may have activated
(e.g. unpaved roads, toll roads).
If the route guidance is already running
you will be asked whether the new desti-
nation should replace the old destination
or if the new destination should be regard-
ed as a stopover.
Start
> Select
Add as stopover
.
destination
If the route guidance is already running
and a stopover has already been entered
you will be asked whether the new desti-
nation should replace the old destination
or the stopover.
> Select
Replace stopover
.
old destination
Entering an address using speech
You can start address entry using speech
from the address input menu by selecting
or from the main menu by selecting
.
PTT
Is your vehicle equipped with a steering
wheel button for voice control, you can
or
Replace old
also press this button.
Notes:
• Only one address can be entered using
the voice entry function. Lists for more
precise selection cannot be operated
using speech.
• The destination country cannot be en-
tered using speech.
• The
indicates the countries for which ad-
dress entry using speech is possible.
If entry using speech is not possible,
and
or
Replace
• An address and the street number must
be spoken in the language of the desti-
nation country.
After the function is activated, a display
that shows you how to say an address will
be shown.
NAVIGATION MODE
symbol in the list of countries
cannot be selected.
PTT
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
23