Color Dropout - Xerox DocuMate 3125 User Manual

Color Management
Select this option to use the scanner's default Gamma table which has been calibrated to produce the best quality
results for your scanner. When this option is not selected, you may need to manually adjust the Gamma, Brightness
and Contrast settings. Please refer to the sections describing Gamma,
about the features and how to adjust the settings.

Color Dropout

Color dropout tells the scanner and software to remove a specific color from the image. You can choose either Red,
Green, or Blue, or define a custom color, to be dropped out of an image.
To input a custom color using its RGB value, select Custom in this list and then input the values for R, G, and B in
their appropriate boxes, where R, G, and B are numbers from 0 to 255.
Tolerance—use the slider to adjust the precision of the color dropout.
• More precise—this option removes a range of colors closest to the pure color selected or defined in the
custom fields. For example, pure red has an R/G/B value of 255/0/0. Selecting Red indicates that the scanner
should look for a range of RGB reds close to pure red and remove them from the image.
More approximate—this option removes a wider range of colors based on the pure color selected in the list or
•
defined in the custom fields.
This option is only available when scanning in grayscale or black and white. The example below shows the original
text with a red watermark and the resulting image with the color removed.
Brightness and Contrast for more information
Xerox DocuMate 3125
User's Guide
157