Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb; Troubleshooting - Yamaha Wild Star XV1600A Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Screw ( 2)
Replacing a turn signal light
bulb or the tail/brake light
bulb
6
1. Remove the lens by removing the
screws.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
1. Screw ( 3)
3. Insert a new bulb into the socket,
EAU00855
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
@
Do not overtighten the screws, oth-
erwise the lens may break.
@

Troubleshooting

Although Yamaha motorcycles receive
a thorough inspection before shipment
from the factory, trouble may occur dur-
ing operation. Any problem in the fuel,
compression, or ignition systems, for
example, can cause poor starting and
loss of power.
The following troubleshooting chart
represents a quick and easy procedure
for checking these vital systems your-
self. However, should your motorcycle
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
EC000108
know-how to service the motorcycle
properly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
6-37
EAU01008