Helmet Holder - Yamaha Wild Star XV1600A Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Projection
2. Seat holder
To install the rider seat
1. Insert the projection on the rear of
the rider seat into the seat holder
as shown, and then push the front
of the seat down to lock it in place.
2. Remove the key from the main
switch if the motorcycle will be left
unattended.
NOTE:
@
Make sure that the rider seat is proper-
ly secured before riding.
@

1. Helmet holder

Helmet holder
The helmet holder is located under the
rider seat.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See page
3-12 for rider seat removal and in-
stallation procedures.)
2. Attach the helmet to the helmet
holder, and then securely install
the seat.
3-13
WARNING
@
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an accident.
@
To release the helmet from the hel-
met holder
Remove the rider seat, remove the hel-
EAU01819
met from the helmet holder, and then
install the seat.
EW000030