Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha TRICKER XG250 Owner's Manual

Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
2
1. Tail/brake light lens
2. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24131
1
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
Do not overtighten the screws, oth-
erwise the lens may break.
Replacing a turn signal light
1 bulb
1. Screw
2. Turn signal light lens
ECA10680
6-29
1. Remove the turn signal light lens
by removing the screw.
2
1
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
EAU24202
2
3
4
5
6
7
8
9