Yamaha TRICKER XG250 Owner's Manual page 60

PERIODIC MAINTENANCE AND MINOR REPAIR
1
1
2
3
1. Headlight unit
2. Screw
4
3. Disconnect the headlight coupler.
4. Remove the headlight bulb holder
5
by turning it counterclockwise, and
then remove the defective bulb.
6
7
8
9
1
2
2
1. Headlight coupler
2. Headlight bulb holder
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
5. Place a new headlight bulb into po-
sition, and then install the head-
light bulb holder into its original
position by turning it clockwise.
CAUTION:
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
EWA10790
1. Do not touch the glass part of the bulb.
ECA10660
6-28
1
6. Connect the headlight coupler.
7. Install the headlight unit by install-
ing the screws.
8. Install the headlight rim by install-
ing the screws.
9. Have a Yamaha dealer adjust the
headlight beam if necessary.